Auto Gate Tech Home Page
 Product Listing with up-to-date prices
 Apollo Gate Operators
 Door King Gate Operators
 Elite Gate Operators
 PowerMaster Gate Operators
 Viking Gate Operators
 Contact information
 Services available
 Purchasing form available
 Dealership information request form
 Frequently Asked Questions
 Technical Support




 

 

POWERMASTER P-5000- (WBG)

Wishbone Barrier Gate Operator
ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS
-1/2 HP, 115V, 10
-Instant Reversing, Continuous Duty Motor, with Overload Protection
-24 V Control Circuit
-Heavy Duty, Across the Line, Motor Controller
-On/Off Power Switch
-Open/Close Switch on Control Panel
-Prewired to Accept Radio Controls, Reversing Equipment, Loop Detector Systems, Automatic Closing Timers, 7 Day Timers and Standard Control Stations.
-Compatible with all Types of Access Control Equipment and Automated Systems.		 12' - 20' Wishbone Style Arm

12 Gauge Enclosure with Lockable Cover

45:1 Gear Reducer (Oil Bath Type)

Double Shaft Reduction System with #50 Chain and Sprockets and Roller Bearing Pillow Blocks

Adjustable Torque Limiting Clutch

Positive Cam Actuated Limit Switches

Solid Linkage with Replaceable Bearings

WISHBONE BARRIER GATE OPERATOR - MODEL P-5000
 
ARCHITECTURAL SPECIFICATIONS:

POWERMASTER MODEL "P-5000" BARRIER GATE

THE OPERATOR HOUSING SHALL BE WEATHERPROOF, WITH REMOVABLE SIDE AND TOP WITH A KEY TO PREVENT UNAUTHORIZED ENTRY. HOUSING CONSTRUCTION TO BE FROM SHEET OF NOT LESS THAN 12 GAUGE. ALL SEAMS TO BE ELECTRIC BEAD WELDED. PAINT FINISH SHALL BE BAKED ENAMEL OVER PRIMER.

MOTOR TO BE 1/2 HP, 115 VAC, 10 REVERSING DUTY TYPE. MOTOR SHALL BE INSTANTLY REVERSIBLE WITH BUILT IN OVERLOAD PROTECTION. MOTOR SHALL BE RESILIENTLY MOUNTED FOR QUIET OPERATION.

GEARBOX TO CONSIST OF A BRONZE WORM GEAR IN OIL BATH RUNNING IN ROLLER BEARINGS. A TORQUE LIMITING CLUTCH SHALL BE PROVIDED ON GEARBOX TO PREVENT OVERLOADING OF DRIVE MECHANISM. A SECONDARY REDUCTION SHAFT SHALL DIRECTLY OPERATE LIMIT SWITCHES.

SECONDARY SHAFT SHALL BE DRIVEN BY HEAVY DUTY #50 ROLLER CHAIN AND SPROCKETS. FINAL DRIVE SHAFT SHALL BE MINIMUM 1-1/4" DIAMETER STEEL SUPPORTED BY HEAVY DUTY ROLLER BEARINGS.

ELECTRICAL ASSEMBLY SHALL CONSIST OF A FULL VOLTAGE ACROSS THE LINE MOTOR CONTROLLER. A TRANSFORMER SHALL BE PROVIDED TO PROVIDE CONTROL CIRCUIT POWER AND POWER AUXILIARY CONTROL EQUIPMENT. CONTROL CIRCUIT TO BE CLASS 11, NOT TO EXCEED 24 VOLTS. CONTROL CIRCUIT TO PROVIDE FOR FULL FUNCTIONS AND TO ACCEPT RADIO CONTROLS, LOOP DETECTORS, AUTO CLOSE TIMERS AND ALL TYPES OF ACCESS CONTROLS WITHOUT ADDITIONAL MODIFICATIONS. SPECIAL LOOP DETECTOR CONTROL CIRCUIT SHALL BE PROVIDED THAT ALLOWS FOR VARIOUS CONTROL FUNCTIONS WITHOUT THE NEED FOR SPECIALIZED DETECTORS. A PREWIRED TERMINAL STRIP SHALL BE PROVIDED FOR FIELD CONNECTIONS.

AN ON/OFF POWERSWITCH AND AN OPEN/CLOSE SWITCH SHALL BE PROVIDED ON OPERATOR CONTROL PANEL FOR LOCAL OPERATION AND SET-UP.

WISHBONE GATE ARM SHALL BE CONSTRUCTED OF 1 " X 6" SOLID WOOD WITH WEIGHT CARRIERS AND COUNTER WEIGHTS TO SUIT ARM LENGTHS FROM 12, TO 201. OPTIONAL LENGTHS UP TO 26'.
 

 

Top

E-mail for more information

Revised: September 06, 2010 .
contact webmaster for web site problems