auto gate tech
30% Tax Reduction in solar applications see your accountant firm for more information.

MEGA ARM
NEXT GENERATION PARKING GATE WITH INHERENT BACKUP POWER


STANDARD FEATURES

BUILT IN BATTERY BACKUP POWER SOURCE
HIGH TORQUE 1/3 HP 24 VOLT DC MOTOR
MICROPROCESSOR (RISC) CONTROL BOARD
OPEN ON POWER LOSS WITH 15 SEC. DELAY
BREAK AWAY FEATURE FOR ALUMINUM ARM
RUST PROOF T-6 ALUMINUM ALLOY CHASSIS
MOLDED POLYETHYLENE COVER-UV STABLE
IRD SENSES OPEN AND CLOSE OBSTRUCTIONS
MULTIPLE VEHICLE MEMORY-BARCODE, ETC...
SOFT START AND STOP WHEN IN MOTION
NO LIMIT SWITCHES-USES MAGNETIC SENSORS
DYNAMIC MOTOR BRAKING-ELECTRONIC
CONFIGURABLE AS MASTER OR SLAVE
LED INPUT AND DIAGNOSTIC INDICATORS
MOSFET MOTOR DRIVE-NO CONTACTORS
SAFE LOW VOLTAGE CONTROL CIRCUITRY
MAXIMUM RUN TIMER (MRT)
U.L. LISTED (U.S.), C-U-L LISTED (CANADA)

MODEL MEGA ARM PARKING GATE OPERATOR

The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering.  Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors.  Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller.  Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners and is equipped with multiple vehicle memory buffer.  Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers).  the standard break away arm design can allow the arm to be reused many times.  Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.

 

DESIGN FEATURES

  • UNIVERSAL CONTROLLER WITH 8 INPUTS

  • MICROPROCESSOR (RISC) ELECTRONICS

  • RIGHT OR LEFT HANDED OPERATION

  • SAFETY-STOP TAIL GATE FEATURE

  • ABILITY TO AUTO OPEN WHEN POWER FAILS

  • TRANZORB SURGE PROTECTION ON INPUTS

  • CLOSING TIMER ADJUSTABLE 1-33 SECONDS

  • ACCEPTS 14' SOFT PADDED GATE ARM (AVAIL)

  • 270 deg. SERVICE ACCESSIBILITY

  • PROGRAMMABLE OUTPUT RELAY-OPTIONAL

  • 2.5 SECOND UP/DOWN SPEED-APPROX.

  • ROOM FOR FUTURE OVERDRIVE CPU

SPECIFICATIONS

  • PERMANENT MAGNET 24VDC MOTOR, 1800 RPM

  • 110/220 VAC AT 4/2 AMPS MAX., 50/60 HZ

  • REGULATED 24VDC 500 MA ACCESSORY POWER

  • DUTY CYCLE DIRECT DRIVE 60:1 GEAR REDUCER

  • SYNTHETIC ALL WEATHER GEAR LUBRICANT

  • 12FT. OR 15FT. ALUMINUM GATE BOOM (ARM)

  • CHASSIS: 1/4" T-6 ALUMINUM ALLOY

  • FINISH: GLOSS WHITE POWDER COAT STD.

  • DIMENSIONS: 41" HIGH, 13.75" WIDE, 16" DEEP

  • SHIPPING WEIGHT WITH ARM:  130 POUNDS

(REQUIRES TWO 7 AMP 12 VDC BATTERIES - NOT INCLUDED)

For God sent not his Son into the world to condemn the world; but that the world through him might be saved. John 3:17
Greg Bradshaw gate equipment florida Email for more information.


designed by Langston Technologies, LLC (2010)