|The SL-3000-UL is smooth and exceptionally quiet. This unit can handle
continuous cycles daily with gates up to 1000 lbs. and 37 ft in length and
has a traveling speed of 12 inches per second. It is designed for high traffic applications such as heavily accessed gated communities and
The SL-3000 Series slide gate operators are used by high demand customers and are the most popular slide gale operators in the country. Users include large development and management companies, as well as prestigious residential gated communities and custom homes.
Modular Board - Uses LEDs indicate all input and output functions of the gate operator.
ERD - If the gate hits a vehicle while closing it re-opens. It it hits a vehicle while opening it stops, reverses 4 to 6 inches and stops again.
Digital Motor Protection - Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses section for several inches, and stops.
Electronic Inputs - Radio receiver, key switch, safety loop, exit loop, telephone entry system, computer input, fire dept. key switch & 3-push-button station.
Timer - Adjustable timer can be set from 0 to 60 seconds.
Power Input On/Off Switch - Controls power input to the board with convenient switch.
Power Management - Board includes electronic power management with over current shutdown and automatic recovery.
Magnetic Lack - With Omni Option board, magnetic lock system is incorporated, allowing you to easily add the "MG1300" electromagnetic locking system to the gate.
Burglar Alarm - With Omni Option board, interfaces with existing home alarm or alarm output.
3 Push Button Control - On board gate operator control for close, stop, and open
Intelligent Master/Slave - Precis synchronized movement and communication between two gate operators using 3 wire RS-485 bidirectional technology.
Spike Suppressors - Fast response time (50 nanoseconds) when subject to an impulse surge (lightning strike) up to 100 amps.
Alternate Outputs - With Omni Option Board 3 push button command control, burglar alarm input and output. QCC option available.
Gate Traveling Time - Adjusted by a precision mechanical device and electrical limit switch system.
Soft Stop - Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy.
Integrated Loop Detectors - Easy to install, modular, plug in loop detector inputs for exit loop, and safety loop.
120 VAC Power - Built-in 120 VAC powered receptacle (NEMA 5-15).Motor Drive - Solid-State electronic motor drive system is incorporated into board.
|Chassis: Constructed with 1/4" sanded, welded, and gold zinc plated sheet
Worm Gear Reduction: 30-to-1 worm gear reduction in an oil bath.
Motor: 1/2 hp, instant reversing, 120VAC 4 amp, 1625 rpm, high speed ball
Cover: High density polyethylene plastic for excellent heat and corrosion
Finishing: All metal parts are gold zinc plated for rust proof protection.
Capabilities: Maximum gate length 37'. Maximum gate weight 1000 lbs
Gate Traveling Speed*: 12' per second average.
Dimensions: Ll 8" X W1 9" X H25"
Approval: UL and ETL Listed to the latest UL325 and UL991 specifications,
|#41 chain is guided by two slotted UHMW rollers which prevent the chain from slipping off of the drive sprocket, thereby requiring less maintenance.
|The SL Series use a solid steel, machined pulley and notched v-groove bell for highly efficient torque transfer from motor to gear reducer.
|The 1/2 HP, instant reversing parking gate motor uses high speed ball bearings for a smooth and quiet operation.
|A highly efficient, extremely quiet, 30 to 1 worm gear reducer is used.
|Elite's operators are skillfully crafted in the USA. Every unit is carefully inspected both electronically and mechanically to provide the quality expected. Elite uses computer aided design to assure the most precise fit for their operator components. High quality and years of proven reliability places Elite SIL Series slide gate operators ahead of the competition.
|THE OMNICONTROL BOARD The Omni board uses LEDs to indicate all input and
output functions of the gate operator and plug-in loop detector
|OPTIONAL POWER WHEELS
The 4", 5' and 6" Power Wheels are manufactured by a computer controlled lathe machine and made from solid, cold rolled steel. They can be used on heavy gates and never require any maintenance. Power Wheels are 30% more efficient in torque transfer from wheels to operator than other wheels such as cast iron or plastic. They are available in two models, the gold zinc plated Power Wheel or the heated treated Power Wheel 2, for extra durability and rust resistance.
An Optional gearbox heater is available to keep the gearbox running in it's optimum temperature range.
|ALARM RESET BUTTON
The optional safety alarm reset button will instantly reset the built-in safety alarm siren on all new OmniControl operators, allowing normal function without waiting for the alarm status to time out.
|OPTIONAL POWER BACKUP
Don't be a prisoner of your own gate. Using the DC-1000 keeps traffic moving during a power failure.
Set up A: In case of a power failure, the gate will open automatically. When the power is restored, the operator will return to normal condition.
Set up B: Gate will not open automatically until activated by a key switch, push button, or dry contact adjustable command.
- Integrated time delay.
- Magnetic lock interface.
- Two way reversing sensor.
- Burglar alarm control option.
- Electronic Motor Drive System
- Intelligent master/slave control.
- Soft stop gate motion control.
- Electronic power management with over current shutdown and automatic recovery.
- 3 Integrated loop detector module inputs. (exit and safety)
- Integrated 3 push button control on board
- Fully compliant and certified to latest UL-325 safety standards.
- Full compliant and certified to UL-991 standard.
- Power input ON/OFF switch.
- Built-in 120 VAC power receptacle. (NEMA 5-15).
- Entrapment sensor.
All UL model Elite SL-3000-UL TM commercial slide gate operators now use the OmniControl board for enhanced, reliable operation conforming to the new UL-325 and UL-991 specifications. This advanced electronic control board now offers integrated functions to make all input and outputs of the gate operator easy to access. It offers solid state motor control, spike
suppressors, safety alarm and many other unique features. The new OmniControl board assures the latest requirements and most advanced technology in the industry, keeping all requirements and most advanced class by themselves.
|PLUG-IN LOOP DETECTORS
These high quality loop detectors are for use with the Elite Omni Board. The electronics are manufactured exclusively for Elite by Reno A&E, a respected name in loop detection technology. With Elite's proven design and integration technology, these component detectors will make
installation and maintenance of loop detection systems simple. They are
available for use with the SL-3000-UL for Exit Loop and Safety Loop.
The SL-3000-UL is manufactured with a precision limit switch system. This
speed ball bearings and high quality components for
The digital current sensor continuously monitors the motor current. It can be set for both the opening and closing cycles. It the gate is closing and hits a vehicle, the sensor detects the increased load on the motor and reverses. If the gate is opening and hits a vehicle, it stops and reverses 4 to 6 inches. The sensor is smart enough to operate on off -level installations and not to react to wind resistance.
|QUICK CLOSE CIRCUIT
The QCC is a function of Elites' slide gate operators that can be enabled by installation of a optional "Code Button" into the OmniOption control board sold exclusively by Elite. Recommended for large gates, 16 feet and longer, this unit is ideal for industrial applications like storage facilities, warehouses, and gated communities with a guard house. The illustrations below visually describe the effectiveness of the QCC.
Picture #1: The authorized command vehicle enters and leaves the loop.
Picture #2: The gate closes as the authorized vehicle clears the loop.
Picture #3: Unauthorized vehicle attempts to enter, but QCC stops the gate, which forces the unauthorized vehicle to either move ahead (if there is room) or back up. QCC will not reset until the unauthorized vehicle has cleared the loop.