The Miracle-One is one of the first linear mechanical, 24 volt DC gate operators that offers all the features the consumer demands. One of these features is variable speed, which is electronically controlled by a micro controller and precise limit switch system. The gate operator starts the cycle slowly, increases in speed, then comes to a stop slowly with the use of internal limit switches. This reduces stress and creates consistently smooth operation Battery backup is included to provide fully functional for up to 200 cycles depending on size and weight of gate. Also included are a 2 way reversing sensor and a vandalism/burglar alarm indicator. The state of the art features offered in the MiracleOne make it one of the most advanced operators in the world and will create new standards in the gate operator industry.

The Miracle-One is available in an optional Master/Slave package, Synchronized gate operator movement is dedicative by a single control board.

 

SPECIFICATIONS INSTALLATION: Can be installed two ways: Open inside Close outside or Open outside Close inside. CAPABILITIES: Max gate size 15 wide, 600 lips. TRAVEL SPEED: 14 to 18 seconds 90' opening. OPERATION CYCLES: 100 cycles per day. DIMENSIONS: L391/2x W31/2xH4!. TORQUE: 600 lbs. of torque. SHIPPING WEIGHT: 58 Its. MOTOR: 24V DO, 12 amp FINISHING: Aluminum OUTPUT SHAFT: 1 shaft

 

	In case of an emergency, the gate can be operated manually by using the convenient key release on the operator
	The standard battery backup will keep the gate operator fully functional when there is a power failure.
	While opening, if the gate hits a vehicle it reverses a few inches and stops. If it is closing and hits a vehicle it will reopen.
	The operator starts the cycle slowly, increases in speed, then comes to a stop slowly using the limit switch system.

STANDARD FEATURES

Variable speed, 24v DC Battery backup standard 600 pounds of torque Uses limit switch system Compact modern design Ultra quiet operation Weather proof housing Includes ERD and alarm Emergency key release Dust Protector

 

ELECTRICAL SPECIFICATIONS
Running System	Uses a microcomputer with built-in "watchdog" system.
Modular Board	Board uses LEDs to indicate all input and output functions.
Reversing Sensor	If the gate hits a vehicle while opening it will reverse a few inches and stops. If it hits a vehicle while closing, it will reopen.
Electronic Timer	Can be set from 3 to 60 seconds, or "pushopen/stop/close" operation.
Master-Slave Option	Dictates synchronized movement between two gate operators.
Safety Loop input	Anti-tailgating system uses a 'stop only method of operation. Will not work as a commercial loop system.
Alarm Output	Can be interfaced with any home alarm system Alarm will sound if the gate is forced open. Optional siren can be installed.
Spike Suppressors	Electronic system is protected by spike suppressors.
Alternate Outputs	Sensor alarm, alarm system and magnetic locks.
Electronic Inputs	Any type of radio receiver, full-control system ' push/open/stop/close safety loop, photocell telephone entry, and key switch.
Optional Solar inputs	The optional solar package allows the Miracle-one T. to operate as an independent unit with the use of DC Adapter and Solar Panel.
Optional Utility Box Available - Call For Details

The Miracle-One comes standard with a built in dust protectant underside.

 

	The optional solar package allows the Miracle-one to operate as an independent unit with the use of DC Adapter and Solar Panel.
	To avoid injury, Elite highly recommends the installation of a photocell sensor as a secondary means of protection.
	An alarm can be incorporated into the control board to alert homeowners when the gate is forced open.
	A Magnetic Lock System can be incorporated into the MiracleOne. control board for higher security.

E-mail for more information

Revised: September 06, 2010 .
contact webmaster for web site problems