>












|
TEC II, IV
& TECLITE

The TEC series products are
versatile, cost effective access control systems. They have interrogated
LCD directories with large, characters. They are easy to read in direct
sunlight or at night. The TEC series is designed with plug on modules that
enable system to accept card access, printers, cameras, modems, etc. to fill the
needs of many applications.
The TEC series is capable of
full card access using up to 4 readers. Tie zones and access levels
provide even more flexibility. Programming is menu driven and can be done
through the keypad, a terminal or modem using Selcom software. The length
of the access PIN codes and the dialing codes can be programmable up to six
digits. A.D.A. models are also available.
These systems are Y2K
compliant and they may be used with Windows 95,98 or NT (single user). The
Selcom software is designed to be "intuitive" software for ease of
learning and use.
The TEC systems have surge protection
incorporated in the design to minimize damage from transient voltages.
TEC 2,4 and TECLITE SPECIFICATIONS
|

-
TEC Systems are Y2K compliant.
-
TEC2,4,have capacities of 16,
30,50,75,100,150,250,500, 1000,and 2000 codes and optional card
capacities of 125,250,500, 1000, and 2000 cards.
-
TEC Systems support up to 4 doors.
-
Dials out either touch tone or digital.
-
Unit will not accept touch tones thru
microphone.
-
Unit mutes tones in speaker during
dialing.
-
Fully programmable thru key pad with
out opening door.
-
Password has 2 levels to limit
programming data access.
-
Talk time programmable from 1 to 99 mm.
-
Postal lock capable.
-
Door auto re-lock. (door sense).
-
Request to exit input. REX
-
Alarm shunt relay.
-
PIN code attempts Programmable form 0
to 9. (strike out).
-
Remote relay activation.
-
Latching relays
-
Programmable background beep".
-
Resident activation door/gate release
number is programmable.
-
Surge protection is incorporated into
the product design on air inputs and out puts to minimize adverse
effects of transient voltages.
-
Code Card capacities can be upgraded
remotely by factory (within specific limits).
-
Card reader inputs Up to 4 readers. Any
wiegand base technology Card, RF, Key pad, ect.
-
Multiple unit capable of sharing same
telephone line with use of MUI. Will allow up to 4 unit on one line.
-
Ground start.
-
Local ringer.
-
Printer, RS232, or current loop.
-
Clock and calendar, timed unlock and
relock.
-
Relay for camera ect.
-
Flush mount ring.
-
B time zones , 8 access levels, and 8
access groups provide control of who goes where and when.
-
Special finishes available upon
request.

-
Residential gated communities or
commercial use.
-
Apartment buildings, Condominiums &
Townhouses.
-
Retirement homes & Convalescent
homes.
-
Hospitals.
-
Office buildings.
-
Banks.
|

TEC2 and TEC4:
-
Size: Door dim. 10' wide x 14"
high x 3" deep. for semi flush mount housing dim. are 9 1/2"
wide x 13 1/2 high at a depth of 2 1/4".
-
Material Used: Housing- 12 ga.
structural aluminum;
Door- 16 ga. stainless steel.
-
Finish: aluminum/stainless steel.
Painted weather resistant finish.
-
Power Input: 18 volt AC, 40 VA UL
listed transformer (provided with unit).
-
Emergency Battery: 12V .7 AHR GEL CELL
on constant charge )for control of line voltage variation and short
term telephone support only), (optional).
-
Telephone Line: Standard voice grade
RJ1 1 C Jack.
-
Mounting: Surface, flush or pedestal
mount.
-
Memory Type: Non-volatile.
-
Tone Detection: Crystal controlled,
capable of detecting short burst 50MS DTMF tone.
-
Shipping Weight: Approx. 15 lbs.
TECLITE:
-
SIZE: 161/4 wide x 19" high
x6" at top and 33/8" at bottom.
-
Construction: Hood ii Ga. structural
aluminum primed and painted weather resistant finish; Front Panel- 16
Ga. brushed stainless steel.
-
Shipping Weight approx. 33 lbs.
-
Power input: 18 volt AC, 40 VA UL
listed transformer (provided with unit).
-
Mounting: Surface, flush or pedestal
mount.
-
Memory type: Non-volatile.
-
Tone Detection: Crystal controlled,
capable of detecting short burst 50MS DTMF tone.
-
Telephone Line: Standard voice grade
RJ11 Jack.
-
Lighting: Low voltage incandescent.
GENERAL:
-
Operating Environment: Temp.: ~200 to
50~ C; (CATV temp.: 0~ to 400 C) Relative humidity: 5% to 95%
non-condensing.
-
Relay Output: Form C dry contact 35V @
3AMP.
-
FCC Reg.: #CPW?4F63331MTE.
-
Ringer Equivalence: 0.2A -0.58.
|
|