Mini Transmitters:
Model 3060 One-Channel, One button Transmitter
Model 3083 Two-Channel, Two-button Transmitter

Micro Transmitter:
Model 3070 One-Channel, One-Button Transmitter

• Test/operate LED
• Neutral case with fine grain finish
• Molded-in hole to accept key chain or key ring
• Supplied Velcro strip for visor or dashboard mounting
• Two-channel model (3083) operates two independent garage doors or an automatic gate and a garage door
• Operates with all Multi-Code receivers and transmitters

Specifications
Power: long-life 12V battery
Frequency:  300 MHz (310 MHz also available for Models 3083, 3070)
Codes:  1,024 (set by dip switches)
Dimensions:  mini (2.5 x 1.5 x .625 inches); micro (2x 1.5 x .625 inches)

Handheld Transmitters

Model 3089 One-Channel, One-Button Transmitter
Model 4120 Two-Channel, Two-Button Transmitter
Model 4140 Four-Channel, Four-Button Transmitter

• Test/operate LED
• Neutral case color
• Molded design to comfortably fit the hand
• Easy access to battery and dip switch
• Two-channel model (4120) operates two independent garage doors or an automatic gate and a garage door;  four-channel model (4140) provides control of up to four seperate operations
• Operates with all Multi-Code receivers and transmitters

Specifications
Power:  long-life 9V battery
Frequency:  300 MHz (310 MHz also available)
Codes:  1,024 on one and two-channel models; four-channel features two sets of dip switches, offering 512 codes each
Dimensions:  3.75 x 2.5 x .875 inches

Gate Edge Transmitters

Model 3022 Wireless Safety Edge Transmitter

• For use with safety edges on gates and large commercial doors
• Can be used where hard wires are impractical
• Easy to install and mount
• More economical than coil/cord sets

Specifications
Power:  long-life 9V battery
Frequency:  300 MHz (310 MHz also available)
Codes:  1,024 (set by dip switches)
Dimensions:  4 x 4.8 x 2.22 inches

Wall-Mounted Lighted Keypads

Model 4200 Wireless Keypad

• Tamper-resistant and weatherproof
• Easy mounting with two screws
• 12-button, alphanumeric keypad
• LED mode indicator
• Operates with all Multi-Code receivers

Specifications
Power:  9 V battery
Codes:  4-digit PIN code access
Frequency:  300 MHz (310 MHz also available)
Dimensions:  2.75 x 6.25 x 1 inches

Model 4100 Wireless Keypads

• Choice of models with independent power supply for operation of many different openers
• Tamper-resistant and weatherproof
• Easy mounting with two screws
• 12-button, alphanumeric keypad
• Operates with all Multi-Code receivers

Specifications
Available Models:

a. Model 4100-05:  24 Vac without transformer, relay output, input voltage of 18 to 33 volt ac at 75 mA min

b. Model 4100-15:  24 Vac with transformer, relay output, input voltage of 18 to 33 volt ac at 75 mA min
Codes:  4-digit PIN code access
Switching Voltage:  30 volts at 1 amp ac or dc max
Dimensions:  2.5 x 6.0 x 1 inches

Receivers

Model 1090 General Purpose Digital Receiver

• Exclusive two-way lugs fit under terminal screws or accept push-on terminals in remote sites
• 11-inch wire antenna supplied
• Three tabs for universal operator mounting

Specifications
Power:  for connection to any three-terminal 24 V operator (for higher voltages, consult factory); no need for separate transformer or adapter
Frequency:  300 MHz (310 MHz also available)
Codes:  1,024 (set by dip switches)
Dimensions: 3 x 5.5 x 1.5 inches

1099 Series Gate Receivers

• For use inside metal enclosures and in other applications requiring stronger signal reception
• Antenna with coaxial connector supplied
• Three models for varying power inputs
• 1 amp output @ 30 Vac maximum on relay contacts

Specifications
Available Models:
a. Model 1099-20: 115 Vac, transformer input (included)
b. Model 1099-30: 24 V input
c. Model 1099-40: 12 V input
Frequency:  300 MHz (310 MHz also available for Model 1099-30)
Codes:  1,024 (set by dip switches)
Dimensions: 5.25 x 3.625 x 1.5 inches

Model 3021 Heavy-Duty
Commercial Gate Receiver

• For any application requiring two channels in one location - 512 codes each channel
• Up-down, open-emergency-stop, and other functions
• For heavy-duty operation
• Cabinet meets NEMA 13,JIC specs
• Two-channel relay output, N/O, N/C, Common - rated 1 amp @ 30 Vac max

Specifications
Power: 24 Vac +- 10% power
Frequency: 300 MHz
Codes: 1,024 total (set by dip switches); 512 codes each of two channels
Dimensions: 6 x 8 x 4 inches

Model 3028 Light-Duty Commercial Gate Receiver

• Identical to Model 3021, except for enclosure
• Housed in light, stamped steel cabinet
• Ideal for sites with dual-channel requirement and a protected environment

Specifications
Power: 24 Vac +- 10% power
Frequency: 300 MHz (310MHz also available)
Codes: 1,024 total (set by dip switches), 512 codes each of two channels
Dimensions: 6 x 8 x 2 inches

Accessories

Model 1066 Coaxial Cable

• For use with all 1099, 3021, and 3028 series receivers
• Includes 16 feet of coaxial cable with F-type connectors at both ends, plus a BNC to F-type adapter and a 5.25 -inch mounting bracket with a 2.5-inch outward extension

Model 1092-01 115 V Adapter Harness with Old Style Terminal Block

• For use in applications with an older receiver (with terminal lugs rather than spades)
• Includes six feet of wire, adapter to block, as well as installation instructions
• 115 Vac transformer input
• Rated 1 amp @ 30 vac maximum on relay contacts

Model 1092-06 24 volt Adapter with Push/On Connection

• For remote mounting where operator supplies 24V power to radio through three terminal screws
• Push-on connectors at the radio and lugs for operator terminal screws
• Includes three feet of wire

Model 1092-07 115 V Adapter Harness with Push/On Connection

• For installations requiring a 115 Vac adapter
• Quick connection to 1090 receiver spade lugs (with lug connections for operator pushbutton terminals)
• Includes six feet of wire (adapter to lug)
• 115 Vac transformer input
• rated 1 amp @ 30 vac maximum on relay contacts