Camden
DOOR CONTROLS

CX-247 PROGRAMMABLE TIMER
INSTRUCTION MANUAL
 

IMPORTANT: Plug in the Timer for at least 3 hours before the relay will
function!
Programming can be done, but the relay will not function until the unit has Charged for 3 hours.

!CAUTION! This electronic timer has a maximum loading printed on the rating
label and under no circumstances should this be
exceeded. Read the section on IMPORTANT SAFETY PRECAUTIONS,

FEATURES

 ? Up to 8 ON and OFF switches a day (56 ON and OFF switches per week)
 ? Option to program individual days or 8 different weekday groups
 ? Minimum switching period one minute.
 ? Easy to read LCD display
 ? Manual override button Battery back-up.

SETTING THE CLOCK TIME

Press and hold the CLOCK button. Then press on the DAY button to select the
correct day, then the HOUR button to select the correct hour and the MEN button to select the correct minutes. When the MIN button is released the time will be set, the seconds will be starting from 00. Either holding down or repeatedly pressing the
appropriate button one can advance the days, hours and minutes.

PROGRAMMING THE SWITCHING TIMES

The Auto Time Switch has the capacity for 8 ON/OFF switches. By using the
blocks of days available, you can save program capacity. The block days are:

MO, TU, WE, TH FR, SA, SU
Individual days of the week
MO, TU, WE, TH FR
SA,SU
MO, TU, WE, TH, FR, SA
MO, WE, FR
TU, TH, SA
MO, TU, WE
TH, FR, SA

For each ON time and each OFF time, the days, hours and minutes must be
set. Press the TIMER button once to set the first ON time - you will see "on" and the number I appears on the left of the LCD display. This indicates that you can now enter the first ON time. Press the DAY button to choose the required day or block of days, and then set the hour and minutes using the HOUR and MIN buttons.
When you have completed setting the required ON time, press on the TIMER
button to validate the entry and move onto the first OFF time you will see "OFF" and the number "1" appear on the left of the LCD display. This indicates that you can now enter the first OFF time by using the DAY, HOUR and MIN buttons as above, Press the TIMER button to validate this entry.
Repeat the same steps for the remaining 7 ON/OFF settings as required.
When you have set the required ON/OFF settings, press the CLOCK button to
return the display to the clock.
The timer will now be ready to operate.
Note that you can check the settings you have programmed by pressing the
TIMER button repeatedly - each setting will appear on the screen.

MANUAL OVERRIDE

You can choose permanent Manual ON, permanent Manual OFF, Auto mode ON and Auto OFF by pressing MANUAL button. When you choose Auto mode ON, the timer turns on until the OFF time is programmed. The program settings will only work in the Auto mode. When Auto mode OFF is chosen the timer is OFF until the next program is activated.

RESET BUTTON

To reset the unit including the time and programmed ON/OFF settings, press
the RESET button using a ballpoint pen.

IMPORTANT SAFETY PRECAUTIONS

 ? Do not use on an extension lead,
 ? Do not plug this timer into another timer switch
 ? Do not plug any device per-forming mechanical movement directly into the
timer
 ? Do not exceed the maximum loading (shown on thee rating label on the
product)
 ? Fan heaters and heaters with exposed elements should not be left
unattended, and it is recommended that these types
of appliances not be connected to timers.
 ? Do not insert needles or any other metal objects into the main outlet
 ? Avoid moisture, extreme temperatures, shock and vibration.
 ? Use indoors only. Recommended ambient temperature - 10 degrees C to 40
degrees C.
 ? Do not open the timer. Repairs must only be performed by a Camden approved
technician.
 ? To clean casing and display use a soft cloth, Do not use chemical or
scouring agents. Do not submerge in water.

E-mail for more information

Revised: September 06, 2010 .
contact webmaster for web site problems