NEW Product Addition to the
CarSense Family!!!

Single Piece Vehicle Motion Detector
(9V to 35 V AC or DC)

CarSense 202 DRIVEWAY SENSOR

The CarSense 202 is based on the well known CarSense 101 design.  The single piece design provides the installer with simple installation procedure.  the CarSense 202 is buried in the ground so it is not noticed by a potential intruder or vandals

The CarSense 202 has wide range power supply of 9V to 35V AC or DC.  Low current consumption of 10 mA makes it an excellent choice for solar power applications.

Wiring Information
Connect the Red and Black wires to a power source of 9V to 35V.  the polarity of wires is not important.  The relay output is as follows: 
Green - Common
White - Normally Closed
Brown - Normally Open

In most cases when installing the CS 202 in free exit or announciator applications the Green and Brown wires are used.  In applications that need a normally closed contact as in magnetic locks installations, the Green and White wires are used.

E-mail for more information

Revised: October 21, 2005 .
contact webmaster for web site problems